installing basin bracket, testing used-oil stove

Yesterday, I went to the meditation center to attend the meeting of choosing trustees for the center. Normally, it is conducted every two years but the last meeting was postponed due to armed conflicts in the region. And I was chosen as one of the trustees for the center. After the meeeting, I installed the bracket for the basin in one of the yogi rooms. It was supposed to be installed by the installer.

Then, in the afternoon, I produced more driniking water with the water purification machine at home. The washing rod I had ordered arrived so I cleaned the bottle as well. The maintenance service I do for the machine are as follow.

• replacing resin and CTO filters every three months. Resin filter is for removing hardness (lime) and CTO is a carbon filter for removing bad smells.
• replacing the micro filter when it turns brownish.
• injecting salt water into the lime (hardness) filter; I think I need to do it monthly. I have done it recently and have to check weekly first to know the filter needs the service.
  I also checked the turbidity (ppm) of the water as well and it needs to be below 50.

(above photo: producing water)

(above two photos: the food-grade disinfectant and the brush I used for cleaning inside the bottle. For cleaning outside, I just washed with soap)

(above photo: the result of water hardness and turbidity test)

And in the evening, I tested the used-oil stove. It is a little shorter and it worked as required. The water boiled in 13 minutes.

Those were some of the activities for yesterday.

@princekham
Myanmar
11th March 2025

This report was published via Actifit app (Android | iOS). Check out the original version here on actifit.io 10/03/2025 9597 Daily Activity